How to link my new BrosTrend booster with home router?

The BrosTrend WiFi booster connects directly to your home router to enhance the range of your current wireless network. For a lot of people, the hardest part is getting over the first connection. Setting it up using re.brostrend.com or the WPS button will both work, but you need to follow the right procedures to make sure it works well. This article goes into great depth on how to set up the Brostrend WiFi extender and connect it to your home wifi correctly.

Before you set up, you need
It seems clear, yet some skip tests and then assume the booster is broken. Before you even begin:

·         Your home router has to be on and connected to the internet.

·         The BrosTrend booster was connected into a power socket.

·         You will need a phone, tablet, or laptop to set things up.

The booster won't cure your primary router's lack of internet; it only makes what's already there stronger.

Connect Booster via 2 Methods

There are two methods to connect the booster to your router:

1.      The procedure for setting up the site using re.brostrend.com.

2.      The WPS button lets you choose the one-touch option.

Both ways work, however the first one (via the setup page) is more dependable and works with more devices. WPS is faster, but it doesn't always work with all routers.

Setting up the Brostrend WiFi extender (via re.brostrend.com)
Most individuals employ this strategy. Here's how it works, step by step:

1.      Connect the BrosTrend booster to a power outlet halfway between your router and the WiFi issue location. Don't place it in the dead zone first, since it won't capture anything there.

2.      Wait for the power light to stay on.

3.      Go to WiFi settings on your phone or laptop and connect to the default network from the booster. It normally shows up as "BrosTrend_EXT."

4.      After you connect, open a browser and put re.brostrend.com into the URL box. Don't look for it on Google; simply go right to the bar.

5.      You will see the login page. If you haven't changed them, the default username and password are generally both "admin."

6.      The booster will look for WiFi networks that are open. Choose your home router's WiFi network from the list.

7.      Be careful while entering your router's WiFi password. This is where people get things wrong the most. If you type in the incorrect number, the Brostrend WiFi extender setup will fail.

8.      Save the changes and let the booster restart.

After you restart, the extender should show you a new WiFi network. This new network will usually include "_EXT" at the end of your current WiFi name. Connect to it and see whether the internet works.

Placement Advice

If you think the booster isn't providing you good speed even after you put it up correctly, the location is generally the problem. Here are some basic yet vital things to remember:

·         Always put the booster where your router's WiFi is still at least two bars strong.

·         Don't put thick walls or metal things between the router and the booster.

·         Don't place it near to the microwave or behind furniture.

·         For houses with two stories, mid-level power plugs typically work best.

The booster is like a loudspeaker. It can't yell the signal loudly if it can barely hear the router.

Connecting using the WPS button

This is the quicker option if your router has a WPS button.

1.      Push the WPS button on your router.

2.      Press the WPS button on the BrosTrend booster within two minutes.

3.      The lights on the booster will flicker and then stay on when they are connected.

You don't even have to sign in to re.brostrend.com to accomplish this. You should now be able to connect the booster to your router.

Common Problems

Things can still become messy, even with the instructions above. This is what generally happens:

·         The Brostrend WiFi extender setup page won't load: You can still be linked to the WiFi on your router instead of the booster network.

·         Try again after disconnecting and connecting to BrosTrend_EXT.

·         Wrong password is the most prevalent problem. Make sure you put your WiFi password for your router properly.

·         Weak signal after setup: The booster was too far away. Try again after moving it closer to the router.

·         The booster is connected, but there is no internet. This might be because of the browser cache. You may erase your cookies or log in on another device.

If everything else fails, press the booster reset button for 10 seconds, let it restart, and start again.

Changing the firmware

Updating the firmware on the booster is one step that is often missed.

Old software might make your computer lag or drop out at odd times.

·         After setting it up, go to re.brostrend.com and log in.

·         Check for a firmware update in the settings.

·         If there is an update, install it and then let the booster restart.

This one step may really help with stability.

Tips for using every day

Now that your booster is connected, here are some advice from the real world to keep it working well:

·       To keep it from becoming stuck, restart it every few weeks.

·       Don't connect too many gadgets to it at once. Use the primary router with the booster for intensive use.

·       Use the 5GHz band during setup for gaming or streaming. It will be quicker if your router can handle it.

·        After setting up, write down the login information so you don't forget it later. 

FAQs
1. How can I go to the BrosTrend WiFi extender setup page?
First, connect to the booster’s Wi-Fi network. Then, in your browser's address bar, enter re.brostrend.com.

2. My booster is connected, but the speed is still sluggish. Why?
It's probably too far away from the router. The booster can only make what it gets bigger. Bring it closer to the router and try again.

3. Do I need to utilize WPS to connect the booster?
No. You don't have to use WPS. The setup page technique works with all routers, although WPS only works with certain.

4. Is it possible to reposition the booster once it has been set up?
Yes, you may relocate it by unplugging it. Just make sure that your router still sends a strong signal to the new location.

Wrap Up
Once you know what to do, it's not hard to connect your new BrosTrend booster to your home router. Re.brostrend.com is the safest option, although WPS might be faster if your router supports it.

Placement is the most important thing for performance, so don't simply plug it in wherever. Reset and try again if it doesn't work—these devices are designed to be tried again. Finally, WiFi will be available where you need it.